Burg Wachter Karat Mini Wall Safe WT13S

Burg Wachter Karat Mini Wall Safe WT13S

Karat wall safes feature a strong double walled door construction with the addition of fire protective insulation for basic fire protection. Manufactured according to VDMA 24992 5/95 standards, Karat wall safes have high quality certified locks for assured security.

• Door leaf features 7mm thick steel

• Solid square locking bolt

Manufactured to VDMA 24992 Security Level B

Safes manufactured to VDMA 24992 Security Level B must have a strong double or triple walled body with a double walled door offering a good level of resistance against attack and burglary. They provide insurance cover for the storage of up to £2,000 in cash and £20,000 in valuables.

SecuSafe 9 lever key lock VdS tested and ECB.S certified to EN 1300 class 1/A

SecuSafe key lock features a secure 9 lever lock mechanism and more than 1,000,000 key differs for additional security. Two keys supplied.

Fire insulated safe door

Safe features a double walled door insulated with a special fire protective material (rated to DIN 4102 A1 for a 100% non-combustible fire resistant material) providing light fire resistance.

Karat & Diplomat – FAQ’s (Frequently Asked Questions)

General

I want to fix my safe. Are plugs and screws included? If so, where are they to be found?

Yes, the bag of fixings is located inside the safe.

I want to fix my safe but the bolts are too short.

The fixings supplied are designed for concrete walls and floors. For all other materials please buy the appropriate fixings

Am I able to fix my safe to the floor?

Yes, there is 1 anchoring possibility. The bottom of the safe has not been drilled. The hole has to be drilled from the inside outwards with a steel drill bit. Remove the clear/white plug, locate where the hole has been started and continue drilling outwards at this point.

Am I able to fix my safe to the wall?

Yes, there is 1 anchoring possibility. The rear back wall of the safe is not drilled. So with free installation the safe has no visible holes in the back. In case wall anchoring is requested, the hole has to be drilled from the inside outwards with a steel drill bit. Remove the clear/white plug, locate where the hole has been started and continue drilling outwards at this point.

My door rattles. How can I adjust the door?

Bend the lateral, upper sheet metal of the bolt hole from down or top diagonal inwards using a flat headed screwdriver.

Can I get a spare shelf for my safe?

Yes, please contact a dealer in your area.

Version S (key only)

I bought a new safe and unpacked it. Where can I find the keys?

One key is inside the safe, the other is outside in a bag or case at the back of the body.

My key has been broken. What can I do?

Take the spare key to a reputable locksmith, who should be able to create a duplicate.

Version E and E FS (Electronic and Fingerscan)

I bought a new safe with an electronic combination lock, are the batteries included and where can I find them?

Yes. 2 batteries are inside the battery compartment with a dividing strip.

Do the electronic safe’s have an emergency lock with keys? if so, where are the emergency keys?

No, Safes with certified electronic locks generally do not have a mechanical emergency lock.

What can I do if the code is no longer known but the door is open?

The PCB must be replaced. Please contact a local dealer.

What can I do if the code is no longer known but the door is closed and locked?

It is not possible to open the safe other than with the correct code. The safe will need to be drilled.

Please contact a local safe centre.

What happens to the programmed code when you change the batteries?

Nothing. The code remains the same.

What is the factory code?

The factory code is 123456

If I forget or lose the code, can the safe be re-set?

No.